Welcome to BSI Standards Draft Review

BSI Standards Draft Review provides an easy way to comment on draft British Standards, Published Documents and Drafts for Development, selected draft international and European standards and draft Publicly Available Specifications (PAS) in order to give us feedback from the widest possible audience before publication.

If you have previously registered on the BSI Standards New Proposals or Document Review sites then you can use the same login details to access Draft Review.

BS 7671:2008/Amendment 1

The Draft for public comment of BS 7671:2008/Amendment 1 is not available through this online review system but is available for free download from the IET via the link below – all comments need to be submitted to IET by 6 September 2010.

http://www.theiet.org/publishing/wiring-regulations/DPC/index.cfm

In addition, new proposed annexes for the inspection reports are also available as a separate download and comment from http://standardsproposals.bsigroup.com.
If you have already registered please log in. Log in
All of the drafts listed below can be viewed and commented on once you have registered with this site. Register
The following drafts are available for comment:

 

Feedback on BSI Standards Draft Review

We are always looking for ways to improve BSI Standards Draft Review. If you have any comments or suggestions please send them to bs.drafts@bsigroup.com.
Draft identifier
Title
Type
Committee
Review end date
Pr EN 71-1 Safety of Toys – Part 1: Mechanical and physical properties  » DPC CW/15 Safety of Toys 31 May 2011
ISO/IEC DIS 29164 Information Technology — Embedded BioAPI » DPC IST/44 – Biometrics 30 Nov 2010
ISO/IEC 29109-7 Information technology — Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794 — Part 7: Signature/sign time series data » DPC IST/44 – Biometrics 30 Nov 2010
ISO/IEC 19794-9 Information technology — Biometric data interchange formats — Part 9: Vascular image data » DPC IST/44 – Biometrics 30 Nov 2010
BS 8535 Railway applications - Wheelsets and bogies - Powered and non-powered axles with inboard bearings - Design method » DPC RAE/3 30 Nov 2010
BS 3247 Specification for salt for spreading on highways for winter maintenance » DPC B/510/21 31 Oct 2010
BS 7195+A1 Guide for prevention of corrosion of metals caused by vapours from organic materials » DPC PKW/0 31 Oct 2010
EN 50558 Interoperabilit­y specifications of common external power supply (EPS) for use with data-enabled mobile telephones  » DPC EPL/100 Audio, Video and Multimedia Systems 01 Oct 2010
NA to BS EN 1991-1-4:2005+A­1:2010 National Annex to BS EN 1991-1-4:2005, Eurocode 1 – Actions on structures – Part 1-4: General actions – Wind actions » DPC B/525/1 30 Sep 2010
BS 1134 Assessment of surface texture -- Guidance and general information  » DPC TDW/4/9 30 Sep 2010
BS 8472 Methods for determining the oxo-biodegradat­ion and phyto-toxicity of plastics » DPC PKW/0 30 Sep 2010
BS 1726-1 Cylindrical helical springs made from round wire and bar – Guide to methods of specifying tolerances for hot coiled springs, and cold coiled springs not covered by BS EN 15800 – General spring testing – Part 1: Compression springs » DPC FME/9/3 30 Sep 2010
BS 2HR 650 Specification for high expansion heat-resisting steel bar and wire for the manufacture of bolts, studs, set screws and nuts (Ni 25.5, Cr 15, Ti 2, Mn 1.5, Mo 1.25, Si 0.7, V 0.3) (Limiting ruling section 20 mm)  » DPC ACE/61/-/48 30 Sep 2010
BS 4HR 601 Specification for nickel-chromium­-titanium-alumi­nium heat-resisting alloy bar and wire (maximum diameter or minor sectional dimension of 30 mm) for the manufacture of fasteners (nickel base, Cr 19.5, Ti 2.2, Al 1.4) » DPC ACE/61/-/48 30 Sep 2010
BS 2HR 506 Specification for nickel-chromium­-cobalt-titaniu­m-aluminium heat-resisting alloy wire: softened (nickel base, Cr 19.5, Co 1.8, Ti 2.5, Al 1.5) » DPC ACE/61/-/48 30 Sep 2010
BS 2HR 505 Specification for nickel-chromium­-iron-titanium-­niobium-alumini­um heat-resisting alloy round wire for thread inserts (nickel base Cr 15.5, Fe 7.0, Ti 2.5, Nb/Ta 0.95, Al 0.70) » DPC ACE/61/-/48 30 Sep 2010
BS 2A 241:2005+A2 General requirements for steel protruding-head­ bolts of tensile strength 1250 MPa (180000 lbf/in2) or greater - Specification » DPC ACE/12 30 Sep 2010
BS 5395-4 Code of practice for the design of limited access stairs » DPC B/208 30 Sep 2010
BS EN 16118:2010 Sheltered housing — Requirements for services for elderly people provided in a sheltered housing scheme  » DPC SVS/8/1 Sheltered housing services 30 Sep 2010
prEN 16114 Management consultancy services » DPC SVS/1/3 Management consultancy services 30 Sep 2010
BS 8538 Specification for the provision of services relating to intellectual property rights » DPC IMS/1/1 30 Sep 2010
PAS 95 Hypoxic Fire Prevention Systems for Occupiable Spaces Specifi­cation » PAS zz/1 14 Sep 2010
PD 6697 Recommendations­ for the design of masonry structures to BS EN 1996-1-1 and BS EN 1996-2 » DPC B/525/6 14 Sep 2010
BS 10175 Investigation of potentially contaminated sites – Code of practice » DPC EH/4 06 Sep 2010